Embroidery Issues: Thread Breakage and Solutions

Embroidery can be a beautiful and rewarding hobby, but it's not without its challenges. Thread breakage is a common issue that can hinder your progress and even damage your embroidery designs. However, by identifying the cause of the problem and following the appropriate recommendations, you can quickly get back to creating beautiful and intricate patterns. So, don't let thread breakage hold you back—learn from these solutions and continue perfecting your embroidery skills!

Problem: Excessive thread tension.

Solution: Adjust the needle thread tension; the standard maximum tension is 125 cN.

Problem: The embroidery thread is poorly threaded.

Solution: Check the threading and correct it if necessary.

Problem: The embroidery machine parts that guide the thread have sharp edges or burrs.

Solution: Smooth the edges of the embroidery machine parts.

Problem: The hook has burrs (for example, caused by needle impact).

Solution: Smooth the hook.

Problem: The stitch density is too high / there are too many layers of stitches on top of each other.

Solution: Modify the machine embroidery design and set a lower stitch density.

Problem: Embroidery is being done too quickly with long stitches.

Solution: Decrease the embroidery machine's speed specifically for long stitches.

Problem: Insufficient thread quality.

Solution: Use branded embroidery threads with high tensile strength, such as ISACORD, MADEIRA, GUNOLD

Comments