Firmware update for Brother Innov-is V5 / V7, 750E and 1250
Firmware update for sewing and embroidery machine, provides access to previously hidden features, and fixes bugs identified during the operation of equipment users.
The owners of embroidery machines Brother Innov-is V5 / V7, Brother Innov-is 750E and Brother Innov-is 1250 appeared free way to update the software of its sewing and embroidery machines.
Description of the updates, see the following note. If you have any questions you can ask them in the comments.
Successful update firmware!
Description of the update -Version 1.08 (May 2013)
- Improved quality of lock stitches when sewing.
- Fixed the situation where the possible was the wrong operation of the machine when performing the inverse (fixing) stitches for some of the major figures in the automatic lock stitching embroidery.
- Fixed a situation where the machine is rebooted while loading embroidery pattern with original embroidery card, created by PE-SCAN / PE-SCAN II.
- Increased the number of stitch patterns that can be selected when using the Dual Feed Foot.<
The following error message is displayed on the LCD screen in the case of the following situation.
- Error
- Cause and Solution>
To thread the needle, please remove the fabric from under the presser foot.
This message appears when you click the "Automatic Threading" if set foot double-feed and presser foot height is 3 mm or more. Please remove the fabric and once again click on the "Automatic Threading".
- Description of the update
Version 1.21 (May 2013)
- Fixed the situation where the possible is to reboot the embroidery machine when loading a specific embroidery pattern from the embroidery card SA332 (XA5386-001).
2013-06-05
Comments
